The goods explaining
Description: Ethylene(in gas cylinder )
Contents: 40 liters
Pressure: 300 psig
Net weight:10kg
Purity:99.95%(V)
Production:YPC Nanjing
contact us:
E-mail:pyh@deshilan.cn
Tel:(86)25 5856 0863Fax:(86)255704 915
扬子石油化工股份有限公司质量检验和管理中心
Quality analysis & managing center of Yangzi Petrochemical
Co.,Ltd.
检验报告
Certificate Of Analysis
执行标准Standard：Q/YZJ 06-01.20-2005 报告编号Information
Nr：YZR22411-02
样品名称Description：
乙烯Polymeric grade Ethene
样品数量Sampling amount：1000ml
样品编号Sample Nr：10258
送样日期Sampling date：2009-05-18
样品状态Guise：气态Gaseous
检验日期Analysis date：2009-05-18
检测项目Test Item and condition
测量数据Analysis result
检测方法Analytic method
乙烯含量%（V/V）Ethene（C2H4 ）Content
99.97 Q/YZJ06-2241-41-06
甲烷和乙烷，ml/m3 Methane and Ethane（CH4+C2H6）252 Q/YZJ06-2241-38-06
碳三和碳三以上， ml/m3C3 and C3+
30 Q/YZJ06-2241-38-06
一氧化碳，ml/m3Carbon monoxide（CO）
2 Q/YZJ06-2241-35-06
二氧化碳，ml/m3Carbon dioxide（CO2）
5 Q/YZJ06-2241-35-06
氧，ml/m3Oxygen（O2）
＜1 Q/YZJ06-2241-36-06
乙炔，ml/m3Acetylene（CH≡CH）
2 Q/YZJ06-2241-33-06
硫（以H2S计），mg/kg Sulfur（Sulfureted hydrogen，H2S） ＜1
Q/YZJ06-2241-34-06
水，ml/m3，Water（H2O）
1.0 Q/YZJ06-2241-37-06
氢，ml/m3，Hydrogen（H2）
＜1 Q/YZJ06-2241-34-06
分析员Analyser ：
审核Auditing：
批准Pass：
检验机构Signature，Corporate Seal
签发日期Date：2009-05-18
Material Safety Data Sheet of Ethylene
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: ETHYLENE
DISTRIBUTOR: Nanjing Deshilan Technology Co Ltd
PRODUCER：Yangzi Petrochemical Corp(YPC), Nanjing
FOR MORE INFORMATION CALL:（86）25 5856 0863 IN CASE OF EMERGENCY
CALL: 119(in China)
2. COMPOSITION / INFORMATION ON INGREDIENTS
INGREDIENT NAME CAS NUMBER WEIGHT %
Ethylene 74-85-1 ≥99.95
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: DANGER! Flammable high-pressure gas. May form
explosive mixtures with air. May cause frostbite. May cause
dizziness and drowsiness. Self-contained breathing apparatus may be
required by rescue workers. Odor: Sweet, musty.
THRESHOLD LIMIT VALUE: Simple asphyxiant (ACGIH, 2002)
EFFECTS OF A SINGLE (ACUTE) OVEREXPOSURE:
SKIN: May cause frostbite.
EYES: May cause frostbite.
INHALATION: Asphyxiation. Effects are due to lack of oxygen.
Moderate concentrations may cause headache, drowsiness, dizziness,
excitation, excess salivation, vomiting, and unconsciousness. Lack
of oxygen can kill.
INGESTION: An unlikely route of exposure. This product is a gas at
normal temperature and pressure.
EFFECTS OF REPEATED (CHRONIC) OVEREXPOSURE: No harm expected.
OTHER EFFECTS OF OVEREXPOSURE: Ethylene is an asphyxiant. Lack of
oxygen can kill.
MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE: The toxicology and
the physical and chemical properties of ethylene suggest that
overexposure is unlikely to aggravate existing medical
conditions.
SIGNIFICANT LABORATORY DATA WITH POSSIBLE RELEVANCE TO HUMAN HEALTH
HAZARD EVALUATION: None known.
CARCINOGENICITY: Ethylene is not listed by NTP or OSHA. The IARC
lists ethylene as Group 3, unclassified as to carcinogenicity to
humans.
4. FIRST AID MEASURES
SKIN: Wash with plenty of soap and water. In case of frostbite, get
immediate medical attention.
EYES: Immediately flush eyes thoroughly with warm water for at
least 15 minutes. Hold the eyelids open and away from the eyeballs
to ensure that all surfaces are flushed thoroughly. See a
physician, preferably an ophthalmologist, immediately.
INHALATION: Immediately remove to fresh air. If breathing has
stopped, give artificial respiration. If breathing is difficult,
qualified personnel may give oxygen. Get medical attention
immediately.
INGESTION: An unlikely route of exposure. This product is a gas at
normal temperature and pressure.
NOTE TO PHYSICIAN: There is no specific antidote. Treatment of
overexposure should be directed at the control of symptoms and the
clinical condition of the patient.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
FLASH POINT METHOD: -213°F (-136°C) TCC
AUTOIGNITION TEMPERATURE: 914°F (490°C)
UPPER FLAME LIMIT (volume % in air): 36%
LOWER FLAME LIMIT (volume % in air): 2.7%
FLAME PROPAGATION RATE (solids): Not applicable
OSHA FLAMMABILITY CLASS: Not applicable
EXTINGUISHING MEDIA: CO2, dry chemicals, water spray, or fog.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Spontaneously explosive when combined with chlorine in sunlight.
Forms explosive mixtures with air and oxidizing agents. Heat of
fire can build pressure in cylinder and cause it to rupture. No
part of a cylinder should be subjected to a temperature higher than
125°F (52°C). Ethylene cylinders are equipped with a pressure
relief device. (Exceptions may exist where authorized by DOT.) If
venting or leaking product catches fire, do not extinguish flam
|
