FULLY AUTOMATATIC HYDRAULICALLY OPERATED FLAT BED SCREEN PRINTING MACHINE - MODEL "HYDRATEX

Even by means of small diapositive Large screens can be exposed with extreme accuracy due to adding device with vernier scale.
Blanket movement through hydraulic system and electro-magnetic clamps.
Lifting and lowering of printing units, blanket washer, heat cum pressure roll for fixing of cloth, blanket guider-all controlled by the hydraulic system.
Continuous blanket motion both at feeding and delivery side which eliminates glue marks on fabric and enables continuous washing of blanket.
Repeat accuracy of ?0.2 mm on Printing Table.
14 Printing cycles per minute of one meter repeat and fabric printing width 1425 mm.
Printing units with different speeds in steps. Suitable for single, double and flood stroke, (more than 2 strokes possible on request)
Centralised programmer for cross border printing.
A conveyor dryer offered as dryer after printing makes the machine more versatile for printing of assorted varieties of fabric.
Printing Width1425, 1625, 1825, 2000, 2400 mm. ( Wider width on request )
No of colours8 / 10 / 12 / 16
Printing table length18 mtr., 21 mtr.,
24mtr., 27mtr.,
Repeat accuracy?0.2mm. on Printing table
Printing repeat range660 to 3000mm.
MULTI GAUZE STRETCHING MACHINE MODEL : TH-28
Any Gauze length for one or several screens can be stretched due to the sliding carriage with clamp carriages.
Smallest Gauze loss by positioning of the sliding carriage for any stretching length and adaptation to all stretching widths.
High production by contemporary stretching of several screens.
Guarantee for parallelism of the Gauze in warp and weft direction as well as even stretching all over stretching area.
Easy operation at control panel for length and crosswise stretching and frame pressing against the Gauze.
Perfect contact of the screen frames with the 'Gauze by means of mechanical lifting and crosswise Gauze-down-holders.
Standard length of the machine of 6 mtr. Can also be delivered longer or shorter by sections of 1.5 mtr. and the machine width up to screens of 2.6 mtr. (length or width).
STEP AND REPEAT MACHINE FOR EXPOSING FAT SCREEN MODLE : T 77
For achieving accurate printing registration it is essential that screens are exposed precisely and perfectly.
This T-77 machine enables quick and extremely precise engraving of flat screens.
Even by means of small diapositive Large screens can be exposed with extreme accuracy due to adding device with vernier scale. With Actinic Blue Light source even very fine contours and half tone (Stipple effect) can be precisely engraved.
Regulated exposure time with automatic timer system.
Very easy to operate and even personnel with little or no experience in handling such machines can get acquainted very quickly.
Instant lighting without flickering.