|
Chipper is stationary drum chipper destinated to shred branches, tree trunks and edgings with flat surface, round timbers, different kind of the sawmill and furniture wastes with width to 280 mm and 140 mm of the height.The chipper control system composes switchbox
Post Date: 2011-03-29 21:40:15 |
|
|
Asphalt cutter working in tandem with tractor; is assigned to the milling of damaged sections of roads.Drive from PTO of the tractor,Depth of milling 0 100mm,Working speed 0 1m/min,Speed at the transport 28km/h,Cutting drum diameter 460mm,Overall dimensions L xWxH
Post Date: 2011-03-11 05:40:15 |
|
|
Weight 860kg,Branch diameter 140mm,Knives quantity 3 cutting + 1 supporting,Feeding speed - Up to 33 mc/min,Chipping capProduct Details: Type: Wood Chipper
Post Date: 2011-03-04 05:40:15 |
|
|
The chipper Skorpion 500 EB is stationary drum chipper destinated to shredd of the edgings with flat surface, round timbers, different kind of sawmill and furniture wastes with width up to 500 mm and 160 mm of the height.The chipper control system composites control
Post Date: 2011-03-14 15:40:15 |
|
|
The flapper grinder Skorpion 500 is destinated to shredd chips and other preliminary shredded wood waste and straw, hay, paper, grain into the very fine fraction.The charging hopper with 500 mm width and 200 mm height makes possible vertical feeding of the material
Post Date: 2011-03-18 11:40:15 |
|
|
The chipper is stationary drum chipper destinated to shredd of the edgings with flat surface, round timbers and furniture wastes with width up to 650 mm and 260 mm of the height.The cutting system of the device composes drum with two or optional three or four cutting
Post Date: 2011-03-17 22:40:15 |
|
|
Stump cutter is destinated for stump grinding left after cutting off the trees.Cutting disc diameter 400 mm (it allows for stump grinding located deep below ground level).Knive quantity 12, including 4 knives with right edge, 4 knives with left edge and 4 knives with
Post Date: 2011-03-05 10:40:15 |
|
|
The chipper Skorpion 250 R/90 is destinated to the shredding of the branches and trunk of the trees with diameter up to 250 mm.The chips are removing through rotary chimney 360 grades in relation to the chassis on the trailor with height of the side 3 m 60 cm.The
Post Date: 2011-03-03 14:40:15 |
|
|
The wood chipper Skorpion 250 SDT is destinated to the shredding of the branches and trunk of the trees with diameter up to 250 mm.The Skorpion 250 SDT is a disk chipper with pneumatic propulsive system on the disk. The chips are removing through rotary chimney 360
Post Date: 2011-03-06 05:40:15 |
|
|
Bush cutter ROAD 205 for road shoulders destinated for work with agricultural tractor.Maximum working distance 237 cm.Cutting head with width 192 cm hydraulic controlled by tractor driver adapted for mowing using hammers and edges Y.It is destinated for road shoulders,
Post Date: 2011-03-19 01:12:17 |
|
|
