Fiber Optic ATEFiber Optic Accessor Trunk Extender (Fiber ATE) is a Red Outstation that is used to increase the distance over which Accessor communication can occur. A pair of fiber on the In-By side of the ATE allows for fiber optic communication for up to two miles.
Universal InterfaceThe UNIFACE allows the end user to incorporate the benefits of the CONSPEC Data Acquisition System to interface with Industry Standard Protocol. The function of the UNIFACE is to allow the user of CONSPEC Devices to be able to utilize all of the
Trunk DriverThe P1863 Dual Trunk Driver Drawer gives you the capability to initiate two CONSPEC Data Highway Communication lines with a maximum of 128 Accessor addresses per trunk. Isolator Switch shuts off all power and communication to both trunks.SpecificationsEnclos
Trunk ExpanderCONSPECs Accessors are the communication links among all the Senturion field equipment and the central processing unit. Placed directly beside the equipment being controlled or monitored, the Accessor automatically transmits data to and receives data from
Blue BarriorCONSPECs P1229 Blue Barrior is an MSHA evaluated power circuit barrior to reduce the available power supplied to instruments located in permissive areas. CONSPECs Blue Barrior can be used with any MSHA class G instrument for monitoring in return airways or
Trunk CableCONSPECs P1209 Trunk Cable is a four-conductor color-coded shielded and armored to provide power and communication to attached sensors and instrumentation.SpecificationsEnclosure TypeOptional PowerPower InputAudible AlarmDimensionsOperating TempDisplayFuseRes
Gas CylinderGas Cylinder from CONPECs P1879 Series Calibration Kits. See Options below for part numbers for your specific gas requirements.SpecificationsEnclosure TypeOptional PowerPower InputAudible AlarmDimensionsOperating TempDisplayFuseResponse TimeSensorsOptions
Sixteen Channel Gas ControllerCONSPEC Controls Multi-Channel Controller is a microprocessor-based multi-analog input controller. The P2260 was designed to be an independent stand-alone controller but can integrate into any type of data acquisition system. The Controller
Single Channel Controller Series CONSPECs Single Channel Controllers are single point monitoring and control processors, which are housed in a NEMA 4-4X weatherproof non-metallic enclosure and are designed to monitor and display any voltage or current input signal from
